Supplemental Lighting Calculator

Is your plant by a window or in a greenhouse, but still not getting enough light? Enter the DLI it needs, the daylight it already gets and how long you'll run a grow light, and see the PPFD the light has to add to close the gap.

Not sure what DLI your plant needs?

Low-light houseplants like pothos, snake plants and ferns do well at about 3–7 mol m⁻² d⁻¹, monstera 4–9, orchids 6–11 and leafy greens 9–14. Herbs need about 12–20, succulents and cacti about 9–22, and fruiting plants like tomatoes 20 or more. These are guidelines, not hard limits. Look up your exact plant with the PPFD & DLI for Plants finder.

How much daylight does my spot get?

Rough numbers for a spot right at the glass on a bright day: a north window gives about 1 mol m⁻² d⁻¹, an east or west window about 3 and a south window about 6 (north and south swap south of the equator). Light drops fast as you move back, so a meter into the room can be half or less. A greenhouse gives about 8 in winter and 25 in summer. Cloudy days, curtains and trees cut all of these. For your real number, read the PPFD at the plant with PPFD METER a few times through the day, average the readings and turn that into DLI with the PPFD to DLI calculator.

How long should the grow light run?

Longer hours at a lower PPFD give the same DLI with a weaker, cheaper light that's gentler on the leaves, so 12–16 hours suits most plants. Run it during the day so it adds to the daylight. Some plants need long, unbroken nights to flower, like poinsettias, Christmas cactus and photoperiod cannabis in flower, so keep their whole day under about 12 hours.

PPFD

from the grow light

162

µmol m⁻² s⁻¹

DLI gap

to add each day

7.0

mol m⁻² d⁻¹

Light schedule

grow light on / off

12 / 12

hours

Daylight gives about 30% of the target. The grow light adds the rest.

How many watts is that?

How much light to add to daylight

Grow light PPFD = (Target DLI − Daylight DLI) × 1000000 ÷ (Grow light hours × 3600)

A plant’s daily light is its daily light budget. The DLI is the total it needs in a day, counted in moles of light per square meter. A window or a greenhouse roof delivers part of that total. A grow light supplies the rest. This calculator works out how much the grow light needs to add. The DLI your plant still misses, spread over the hours your light runs, gives the PPFD the light has to deliver at the plant.

It’s the classic problem with houseplants. A spot that looks bright to us is often dim to a plant, because our eyes adjust and plants don’t. Even right at a sunny window, glass and the angle of the sun cut a lot of light, and a meter back into the room it can drop to half or less. That’s why a monstera or a fiddle leaf fig stretches toward the window, drops leaves or stops growing in winter. Herbs, succulents and seedlings, which need far more, struggle on almost any windowsill. Greenhouses have the same gap in winter, when short, cloudy days leave crops well under their target.

The daylight presets are rough numbers for a bright day, at the glass, in the middle latitudes. Your own spot can be much higher or lower, so measuring beats guessing. Read the PPFD at your plant with PPFD METER a few times through the day and average the readings, since one midday reading runs high. Then turn that average into DLI, using your hours of daylight, with the PPFD to DLI calculator.

Run the grow light during the day so it adds to the daylight, and favor longer hours at a lower PPFD. The same DLI over 14 hours needs a weaker, cheaper light than over 8, and it’s gentler on the leaves. Keep the light at a distance where the PPFD at the plant matches the result. Not sure what DLI your plant needs? Look it up with the PPFD & DLI for Plants finder, then see how many watts it takes with the Grow Light Wattage Calculator.